YOKOGAWA F3LC11-1F, User Manual

Page: 32 / 202

A1-18
IM 34M6H41-02E 2nd Edition : Aug. 1, 2005-00
n
Transfer Screen Data
After saving the screen data and the project, transfer the screen data to the display.
Before transferring the screen data, check that the display is connected to the PC with a
dedicated transfer cable.
n
Set Communication Parameters
Set the module switches as follows:
SW1: C (115.2Kbps)
SW2: turn on 1 and 6 and turn off the rest (8 bits, Ending character “Yes”)
SW3: turn everything off
n
Set Communication Parameters on the Display side
Set the communication parameters of the display (TOP) as follows:
1. Turn on the power to the TOP and press on the three corners of the screen for a
short while. (Press on three points)
Depending on the previous communication parameters, this may take a while.
2.
Click [Off-line] at the bottom of the screen to enter off-line mode.
3. On the main menu, touch 1 Initialization → 2 Setup I/O → 1 Setup
Communication. On the communication setting screen, set the values as shown
below and touch Exit.
8
1
None
ER control
RS232C
115200
Communication Setting
Transmission
speed
Data Length
Stop bits
Parity
Flow control
Communication
mode
2400 4800 9600 19200 38400 57600
7
2
Odd Even
X control
Cancel
Exit
FA10603.VSD
4-line 2-line