YOKOGAWA F3LC11-1F, User Manual

Page: 24 / 202

A1-10
IM 34M6H41-02E 2nd Edition : Aug. 1, 2005-00
(1) Cabling Example for Connection to a Display
The connector on a display is D-sub 25-pin female.
Therefore, use a D-sub 25-pin male
↔
D-sub 9-pin male cross cable.
Null modem cables are available at the company. The modules and their specifications,
and internal connections are as follows:
Model
Basic
specification
Description
RS-232-C null modem cable with control line (9-25 pins)
ML gateway card
(
CP7
□)－
for connecting RS-232-C devices
-KM01 Cable length 1 m
-KM05 Cable length 5 m
YCB215
-KM15 Cable length 15 m
RS-232-C null modem cable without control line (9-25 pins)
ML gateway card
(
CP7
□)－
for connecting RS-232-C devices
-KM01 Cable length 1 m
-KM05 Cable length 5 m
YCB216
-KM15 Cable length 15 m
*: The pin number is dependent on the display. Refer to the display manual.
CN1 side (FA-M3)
PIN No.
Connector Cover
CN2 side
PIN No.
Connector Cover
Shield
3
2
7
8
6
5
1
4
1
2
3
4
5
6
7
8
20
FG
SD
RD
RS
CS
DR
SG
CD
ER
SD
RD
RS
CS
DR
SG
CD
ER
FA10402.VSD
(2) Cabling Example for Connection to a Personal Computer
The connector on a personal computer (DOS/V machine) is D-sub 9-pin male (inch
screw).
Therefore, use a D-sub 9-pin female (inch screw)
↔
D-sub 9-pin male (mm screw) cross
cable.
SD
P
ersonal
com
puter
lin
k m
od
u
le
3
2
7
8
6
4
5
Connect to enclosure
of connector
Connect to enclosure
of connector
P
ersonal
comp
uter
or di
spl
ay
3
2
7
8
6
4
5
D-sub 9-pin female
(M2.6 inch screw)
RD
RS
CS
DR
ER
SG
D-sub 9-pin male
(M2.6 mm screw)
SD
RD
RS
CS
DR
ER
SG
FA10403.VSD
When connecting to a personal computer with D-sub 25-pin connector, such as the old
PC-9801 series from NEC, use the same cables described in (1) Cabling Example for
Connection to a Display.