YOKOGAWA F3LC11-1F, User Manual

Page: 108 / 202

B1-12
IM 34M6H41-02E 2nd Edition : Aug. 1, 2005-00
B1.5 Attaching and Detaching Modules
Attaching/Detaching Modules
Figure B1.11 shows how to attach this module to the base module. First, hook the
anchor slot at the bottom of the module to be attached onto the anchor pin on the
bottom of the base module. Push the top of this module towards the base module until
the yellow button clicks into place.
CAUTION
Always switch off the power before attaching or detaching a module.
Base module
This module
Anchor pin
FA10501.VSD
Figure B1.11 Attaching or Detaching this module
CAUTION
Do not bend the connector on the rear of the module by force during the above
operation. If the module is pushed with improper force, the connector may bend causing
an error.
Detaching Modules
To remove this module from the base module, reverse the above operation.
Press the yellow button on the top of this module to unlock it, and titling the module
away from the base module. Then lift the module off the anchor pin at the base.