YOKOGAWA F3LC11-1F, User Manual

Page: 172 / 202

C3-4
IM 34M6H41-01E 3rd Edition : Aug. 1, 2005-00
C3.1.3 Attaching and Detaching Modules
(1) Attaching Modules
Figure C3.5 shows how to attach the F3LC11-2N Module to the base module. First hook
the anchor slot at the bottom of the module to be attached onto the anchor pin on the
bottom of the base module. Push the top of this module toward the base module until the
button at the top clicks into place.
Base module
Anchor pin
This module(F3LC11-2N)
F0305.EPS
Figure C3.5 Attaching F3LC11-2N Module
CAUTION
- DO NOT bend the connector on the rear of the module by force during the above
operation. If the module is pushed with inappropriate force, the connector may bend
and this damage will cause a module installation error during self-diagnosis.
(2) Detaching Modules
To remove this module from the base module, reverse the above operation by
pressing the button at the top of the personal computer link module to unlock it, and tilting
the module away from the base module. Then lift the module off of the anchor pin at the
base.