19-6
IM 701310-01E
Item
Specifications
Waveform parameter
analysis
Display a waveform parameter in the histogram, trend, or list format
Frequency distribution
analysis
Displays a histogram of accumulated signal data within the specified range
Serial bus signal analysis
(option)
Analyzes and displays the data on the I
2
C, CAN, LIN, SPI, and UART signals
Computation
CH1 to CH4, M1 to M4
+, –, *, Integ, Edge Count, Rotary Count, Filter (Through, Delay, Moving Avg, IIR Low Pass,
IIR High Pass)
M1 to M4
CAN (option)
Stuff Bit
User-defined computation (option)
Set equations by arbitrarily combining the following operators and constants.
Operators: +, –, *, /, ABS, SQRT, LOG, LN, EXP, P2, -(negation), DELAY, BIN, SIN, ASIN,
COS, ACOS, TAN, ATAN, DIFF, INTEG
Constants: K1 to K4, 0 to 9, PI, e, fs, 1/fs, Exp, Measure Item
Power supply analysis function (option)
Standard computation, power, Z, I2t, and user-defined computation are possible
Reference function
Displays and analyzes (computation and cursor) up to 4 traces (M1 to M4) of saved waveform data.
Load and replay history waveforms
Action-on-trigger
Acquire the signal, perform determination using automated measurement of waveform parameters
or waveform zone, and execute the selected action each time the the specified number of triggers
is activated
Mode
OFF
Not execute the action.
All Condition
Acquire the signal and execute the action
GoNogo Zone/Param
Determine whether the acquired signal waveform passes a specified zone or whether a specified
parameter of the waveform enters within a specified range and execute the action
Zone type
:
Rect, WAVE, and Polygon
Param type
:
Measure, FFT, and XY
GoNogo Telecom Test
Determine whether the conditions specified in the Telecom Test is met and execute the action
Category type
:
Mask Test and Eye Pattern
Action
Beep, save/print the screen image, save the measurement data, or send mail (/C8 or /C10 option)
Screen Image Data Printing/Storage
Item
Specifications
Built-in printer (option)
Print the screen image.
External printer
Output the screen image to an external printer via the USB or the Ethernet interface
2
Supports EPSON and HP (PCL) inkjet printers
Only HP (PCL) supported for the Ethernet interface
PC card, internal memory,
internal hard disk,
1
USB storage medium,
Network drive
2
Output data format: PNG, BMP, and JPEG
1 Internal HDD is an option.
2 When the Ethernet Interface option is installed.
Data Storage
Item
Specifications
History memory
Automatically stores up to 2000 history waveforms (with a record length of 2.5 kW)
PC card, internal memory,
internal hard disk,
1
USB storage medium,
Network drive
2
Saves measurement data, setup data, and various data
1 Internal HDD is an option.
2 When the Ethernet interface option is installed.
19.6 Functions
