manualshive.com logo in svg

YOKOGAWA DL9000 Series, User Manual

The YOKOGAWA DL9000 Series offers high-performance digital oscilloscopes for accurate signal analysis. Ensure optimal usage of your device by downloading the user manual for free at manualshive.com. The manual provides comprehensive instructions and essential information for operating your oscilloscope effectively. Get your manual now and make the most of your DL9000 Series.

Share
Download
background image

xiv

IM 701310-01E

Contents

Chapter 13  Saving and Loading Measurement Data

13.1  Flash ATA Memory Card ................................................................................................. 13-1
13.2  Connecting a USB Storage Medium to the USB Port .................................................... 13-2
13.3  Connecting to a Network Drive ....................................................................................... 13-3
13.4  Saving/Loading the Setup Data ...................................................................................... 13-4
13.5  Saving/Loading the Measurement Data ....................................................................... 13-10
13.6  Saving and Loading Accumulated and Snapshot Waveforms ...................................... 13-17
13.7  Saving/Loading Waveform Zones, Polygonal Zones, and Mask Patterns .................... 13-21
13.8  Saving Screen Image Data .......................................................................................... 13-25
13.9  Saving Analysis Results ............................................................................................... 13-28
13.10  Changing the File Attributes and Deleting Files ........................................................... 13-32
13.11  Copying/Moving Files ................................................................................................... 13-35
13.12  Changing the Directory Name or File Name of the Storage Medium/ 

Creating Directories ...................................................................................................... 13-38

13.13  Connecting to a PC Using the USB Port ...................................................................... 13-41

Chapter 14  Displaying Reference Waveforms

14.1  Turning ON/OFF the Reference Waveform Display ....................................................... 14-1
14.2  Displaying Stored Data as Reference Waveform ........................................................... 14-2
14.3  Displaying Waveforms Inverted ...................................................................................... 14-4
14.4  Saving Data .................................................................................................................... 14-5
14.5  Displaying Scale Values and Labels............................................................................... 14-6
14.6  Displaying History Waveforms Automatically ................................................................. 14-7
14.7  Displaying the Acquisition Time of a Loaded Waveform ................................................. 14-8

Chapter 15  Ethernet Communications (Optional)

15.1  Connecting the DL9000 to the Network ......................................................................... 15-1
15.2  Setting the TCP/IP .......................................................................................................... 15-3
15.3  Saving and Loading Measurement/Setup/Image Data on a Network Drive ................. 15-13
15.4  Setting the Mail Transmission (SMTP Client Function) ................................................ 15-16
15.5  Using SNTP to Set the Date and Time ......................................................................... 15-20
15.6  Accessing the DL9000 from a PC (File Server) ........................................................... 15-21
15.7  Using a PC to Monitor the DL9000 and Change Its Settings (Web Server) ................. 15-24
15.8  Setting the the Network Printer .................................................................................... 15-30
15.9  Checking the Availability of the Ethernet Interface ....................................................... 15-32

15.10  Configuring a Firewall

 ................................................................................................... 15-33

15.11  Initializing All Ethernet Interface Settings (Only on models with the LXI option, /C9 and 

/C12) ............................................................................................................................. 15-35

Chapter 16  Rear Panel Input and Output

 16.1  External Trigger Input (TRIG IN) .................................................................................... 16-1
 16.2  Trigger Output (TRIG OUT) ............................................................................................ 16-2
 16.3  RGB Video Signal Output (RGB VIDEO OUT) ............................................................... 16-3
 16.4  GO/NO-GO Signal Output .............................................................................................. 16-4
 16.5  Trigger Comparator Signal Output ................................................................................. 16-6

Chapter 17  Other Operations

17.1  Changing the Message Language, Menu Language, and Font Size, and Turning ON/OFF 

the Click Sound .............................................................................................................. 17-1

17.2  Listing the Setup Data .................................................................................................... 17-3
17.3  Changing the USB Keyboard Language ........................................................................ 17-4

Summary of Contents for DL9000 Series




























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DL9000 Series

OMCA 930 Use And Maintenance Manual preview
930
Brand: OMCA Pages: 72
Barko Hydraulics 930 Service Manual preview
930
Brand: Barko Hydraulics Pages: 92
Bang & Olufsen BeoPlay A9 Quick Manual preview
BeoPlay A9
Brand: Bang & Olufsen Pages: 2
Raven CR7 Update Manual preview
CR7
Brand: Raven Pages: 17
Campbell SC932A Product Manual preview
SC932A
Brand: Campbell Pages: 12
e+p Elektrik Handels HDT 300 Quick Installation Manual preview
HDT 300
Brand: e+p Elektrik Handels Pages: 2
Tascam SX-1 Brochure & Specs preview
SX-1
Brand: Tascam Pages: 8
Waters 2707 Quick Install Manual preview
2707
Brand: Waters Pages: 4
Waterpik ClearView Instructions For Use preview
ClearView
Brand: Waterpik Pages: 2
Ironton 41725 Owner'S Manual preview
41725
Brand: Ironton Pages: 6
gbo ULTRATHERM 908i User Manual preview
ULTRATHERM 908i
Brand: gbo Pages: 32
Dantel 49009 Installation & Operation Manual preview
49009
Brand: Dantel Pages: 6
Zero 88 ECLIPSE Operator'S Manual preview
ECLIPSE
Brand: Zero 88 Pages: 22
Yaasa Illuminator Operating Instructions Manual preview
Illuminator
Brand: Yaasa Pages: 20
Yamaha MagicStomp Effect List preview
MagicStomp
Brand: Yamaha Pages: 31
Yuwell 7E-B5 Operation Instructions preview
7E-B5
Brand: Yuwell Pages: 2
Strapack iQ400 Original Instruction preview
iQ400
Brand: Strapack Pages: 16
Hameg HM1004 Service Manual preview
HM1004
Brand: Hameg Pages: 60

Brands by name

Popular brands

Load more brands