6-68
IM 701310-01E
Explanation
This feature triggers the rising edge of the Break delimiter of the LIN bus signal.
Mode
The mode is fixed to Break. The trigger activates on the rising edge of the Break delimiter
of the LIN bus signal.
Break Field
Synch Field
Protected Identifier
Break Delimiter
Trigger point
Source
You can select the source from CH1 to CH4.
Bit Rate
You can select the LIN bus signal transfer rate from the following:
19200 bps, 9600 bps, 4800 bps, 2400 bps, 1200 bps
If you select the User check box, you can set the transfer rate from 1000 bps to 20000
bps in 10-bps steps.
Trigger Level
You can set the LIN bus signal trigger level for CH1 to CH4 separately.
• The selectable range is 8 divisions within the screen. The resolution is 0.01 divisions.
For example, if the T/div setting is 2 mV/division, the resolution is 0.02 mV.
• You can reset the trigger level to the current offset voltage by pressing RESET.
Hysteresis
See section 6.5 for details.
6.17 Triggering on a LIN Bus Signal
