19-3
IM 701310-01E
Specifications
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
App
Index
Item
Specifications
Trigger position
Can be set in 0.1% increments of the display record length
Trigger delay
By time:
Delay for a specified time after the trigger condition is met
0 to 10 s, minimum resolution 5 ps (depending on the sample rate)
First edge after
delay:
Delay until the first specified edge after the specified time after the trigger
condition is met
0 to 10 s, resolution 2 ns
Edge Count:
Delay until the specified number of specified edges after the trigger condition
is met
1 to 10E9, in steps of 1
Hold-off time setting range 20 ns to 10 s, resolution 5 ns
Trigger slope
Rising or falling
Trigger type
Edge/State
Edge:
Activate a trigger on the edge of a single trigger source
Edge(Qualified):
Activate a trigger on the edge of a single trigger source while the qualification
requirement is met
Edge OR:
Activate a trigger on the logical OR of the edge conditions of multiple trigger
sources (max. 50 MHz)
State:
Activate a trigger on the ENTER or EXIT condition when the state condition
is met
Width
Pulse:
Activate a trigger on the width of a single trigger source
Pulse(Qualified): Activate a trigger on the width of a single trigger source while the qualification
requirement is met
Pulse State:
Activate a trigger on the width when the state condition is met
Time width setting mode
More than:
Activate a trigger when the condition changes when the time
during which the condition is met is longer than T1
Less than:
Activate a trigger when the condition changes when the time
during which the condition is met is shorter than T1
Between:
Activate a trigger when the condition changes when the
time during which the condition is met is longer than T1 and
shorter than T2
Out of Range: Activate a trigger when the condition changes when the time
during which the condition is met is shorter than T1 or longer
than T2
Time out:
Activate a trigger when the time during which the condition is
met exceeds T1
Setting time (T1/T2):
1 ns to 10 s, resolution 500 ps resolution
Time accuracy:
�(0.2% of setting value + 1 ns)
Event Interval
Event
:
Edge, Edge(Qualified), State, Pulse, Pulse(Qualified), Pulse State, Serial
pattern, I
2
C, CAN, LIN, SPI
(selectable as an event except TV, Edge OR, and UART)
Event Cycle:
Activate a trigger when the event cycle is within the specified time range
Event Delay:
Activate a trigger if the time interval between the event 1 occurrence and the
first event 2 occurrence is within the specified time range
Event Sequence: Activate a trigger when the first event 2 occurs within the specified time range
after the event 1 occurrence
Time width setting Same as the time width setting mode of Width
mode:
Setting time (T1/T2): 1.5 ns to 10 s, resolution 500 ps
Time accuracy:
�(0.2% of setting value + 1 ns)
Enhanced
TV:
Trigger on video signal in various TV systems
Mode:
NTSC, PAL, HDTV, USER
Input channel: CH1 to CH4
Sync Guard:
60-90% of Hsync, in steps of 1%
Line:
5 to 1054(NTSC), 2 to 1251(PAL), 2 to 1251(HDTV), 2 to
2048(USER)
Field:
1, 2, X
Frame Skip:
1, 2, 4, 8
Serial Pattern:
Trigger on general-purpose serial communications signal
Maximum bit rate:
50 Mbps
Maximum bit length:
128 bits
19.3 Trigger Section
