10-40
IM 701310-01E
Turning the T-Y Waveform Display ON and OFF and Selecting the
Reference Position
13.
Press the
Display Setup
soft key.
14.
Press the
VT
soft key to select ON or OFF.
15.
Press the
Ref Position
soft key.
16.
Use the
rotary knob
to set the reference position.
Configuring the Vertical and Horizontal Axes
17.
Press the
Scale
soft key under Vertical to select Auto or Manual.
If you select Auto, proceed to step 20.
18.
Press the
Ref/Sens
soft key.
19.
Use the
rotary knob
to set the reference level and sensitivity.
Press the soft key to select the setting that you want to set using the rotary knob.
20.
Press the
Scale
soft key under Horizontal.
21.
Press a soft key from
Auto
to
Left/Right
to select the horizontal axis.
• If you select Auto, proceed to step 26.
• If you select Center/Span, proceed to step 22.
• If you select Left/Right, proceed to step 24.
22.
Press the
Center/Span
soft key.
23.
Use the
rotary knob
to set the center and span.
Proceed to step 26.
24.
Press the
Left/Right
soft key.
25.
Use the
rotary knob
to set the left and right edges.
26.
Press
ESC
to return to the previous screen.
Center
Span
Left
Right
Ref
Sens
When Center/Span
is selected
When Left/Right
is selected
10.7 Performing FFT Analysis
