4-14
IM 701310-01E
Recalling the Setup Data
2.
Press the
Recall
soft key.
3.
Press any of the
#1
to
#12
soft keys to select the setup data to be recalled from
the internal memory. Press the Next 1/2 soft key to select #7 to #12.
Recall
Explanation
Up to 12 sets of setup data can be stored to the internal memory. You can load setup
data stored in the past to produce the same settings.
Stored Items
All items set using the soft key menu or rotary knob and the channel ON/OFF state are
stored.
Storing the Setup Data
You can store the setup data in any of the 12 internal memories, #1 to #12.
If data is already stored in the internal memory of the specified number, the data is
overwritten. However, if the memory is locked in the detail menu of the store data, the
data cannot be overwritten.
Recalling the Setup Data
You can recall the setup data that is stored in any of the 12 internal memories, #1 to #12.
You can only select memories that have setup data stored.
Store Data Details
The date when the data was stored to the internal memory is displayed.
You can enter a comment using up to 16 alphanumeric characters. The comment that
you enter appears below the internal memory number in the Store/Recall menu.
Internal memories with a check mark under Lock are read-only.
Note
• The stored setup data are not cleared even if you initialize the settings on the DL9000.
• If you recall setup data while signals are being acquired, signal acquisition is restarted.
4.6 Storing and Recalling Setup Data
