YOKOGAWA AQ7280 OTDR User Manual Download Page 86

Page: 86 / 195

3-5

IM AQ7280-01EN

Optical Pulse W

aveform Display

Index

Approximated Lines

In the 4 Point or 5 Point marker modes, you can display the approximated lines that are used to

calculate splice loss or return loss.

OFF: Approximated lines are not displayed.
ON: Approximated lines are displayed.

Approximated lines

Cursor dB Value

  You can display not only the distance at the cursor position, but also the dB value.
  OFF:   Only the distance at the cursor position is displayed.
  ON:    he distance and the dB value at the cursor position are displayed.

dB value at the cursor position

Cursor Display Format

You can select the cursor display format from the following.

CROSS(+)

The position on the waveform is displayed with vertical and

horizontal cursors that intersect.

LINE(¦)

The position on the waveform is displayed with a vertical cursor.

Crosshair display

Line display

3.2 Configuring the Waveform Display

Summary of Contents for AQ7280 OTDR




































































































































































































Search results

Summary of Contents for AQ7280 OTDR

Reviews:

Related manuals for AQ7280 OTDR

Brands by name

Popular brands

YOKOGAWA AQ7280 OTDR, User Manual

Search results

Summary of Contents for AQ7280 OTDR

Reviews:

Related manuals for AQ7280 OTDR

Brands by name

Popular brands