YOKOGAWA AQ7280 OTDR User Manual Download Page 137

Page: 137 / 195

6-6

IM AQ7280-01EN

Setting Labels

* Enter the label by following the procedure provided in “Entering Character Strings” in the Getting Started Guide,

IM AQ7280-02EN.

Set the label.

Set the company name.

Set the name.

Set the cable ID.

Set the fiber ID.

Set the fiber type (

652:Conventional SMF,

653:Dispersion Shifted SMF,

654:Cut-Off Shifted SMF,

655:Non-Zero Dispersion Shifted SMF,

656:NZDSF for Wideband Transport,

657:Bend Optimized SMF,

651:Multi-Mode Fiber)
Set the cable code.

Set the start position.

Set the end position.

Set the current data flag

(BUILT (BC), REPAIRED (RC), OTHER (OT),

and CURRENT (CG))

Set the direction (A→B, B→A).

This is available only for multi-core fiber measurement.

Explanation

Action

Select Save or Load.
You cannot use this when the power meter logging feature is in use.

File Type

Set the extension depending on the type of data to save or load.
You cannot use this when the power meter logging feature is in use.

Saving

The following types of files can be saved.

• Top Screen

Display

Description

*.CFG

System settings are saved to a file in CFG format.

*.BMP

A screen image file of the product information is saved to the root folder with the name

Systeminfo.BMP.

• OTDR Feature, Fault Locator Feature

Display

Description

*.SOR

Waveform data measured from an optical pulse (including the measurement conditions)

is saved in an SOR file format that conforms to Telcordia SR-4731.

*.BMP

Screen image data is saved to a file in BMP format.

*.JPG

Screen image data is saved to a file in JPG format.

*.SOR|*.BMP

Both SOR and BMP files are saved.

*.SOR|*.JPG

Both SOR and JPG files are saved.

*.SET

Measurement conditions are saved to a file in SET format.

.CSV (waveform) Waveform data measured from an optical pulse is saved to a file in CSV format.
.CSV (event)

Event data is saved to a file in CSV format.

The screen image immediately before entering the file operation screen is saved.

6.3 Saving and Loading Data

Summary of Contents for AQ7280 OTDR




































































































































































































Search results

Summary of Contents for AQ7280 OTDR

Reviews:

Related manuals for AQ7280 OTDR

Brands by name

Popular brands

YOKOGAWA AQ7280 OTDR, User Manual

Search results

Summary of Contents for AQ7280 OTDR

Reviews:

Related manuals for AQ7280 OTDR

Brands by name

Popular brands