YOKOGAWA AQ7280 OTDR User Manual Download Page 39

Page: 39 / 195

2-14

IM AQ7280-01EN

Setting Measurement Conditions in PON Mode

Press the

Meas Setup

soft key to display the following screen.

Set the number of splitter stages (1, 2).

Set the route (ONU OLT, OLT ONU).

Set the wavelength.

See pages 2-2 and 2-5.

Set the number of splitter splits

(2, 4, 8, 16, 32, 64, 128).

Opens the detail screen

Set measurement items.

The settings change to values that are suitable for the measurement of the specified

number of stages and splits. You can also change the settings according to your

measurement conditions. For details on measurement items, see pages 2-6 to 2-9.

Note

The total number of splits when the number of splitter stages is set to 2 is up to 128.

Setting Analysis Conditions in PON Mode

Press the

Analysis Setup

soft key to display the following screen.

Set the splitter and wavelength.

See “Setting Measurement

Conditions in PON Mode.”

For details on analysis items,

see pages 2-10 to 2-13.

2.1 Setting the Measurement and Analysis Conditions

Summary of Contents for AQ7280 OTDR




































































































































































































Search results

Summary of Contents for AQ7280 OTDR

Reviews:

Related manuals for AQ7280 OTDR

Brands by name

Popular brands

YOKOGAWA AQ7280 OTDR, User Manual

Search results

Summary of Contents for AQ7280 OTDR

Reviews:

Related manuals for AQ7280 OTDR

Brands by name

Popular brands