YOKOGAWA AQ7280 OTDR User Manual Download Page 156

Page: 156 / 195

6-25

IM AQ7280-01EN

File Operation and Printing

Index

6.9 Setting the Items to Display in File Lists

Procedure

File List Setup Screen

Press

SETUP

and then the

System Setup

soft key to display the System Setup screen.

Using the

rotary knob

and

ENTER

, select

File List Setup

to display the following screen.

• When Display is set to Default or File List

Set Display to Default or File List.

You cannot set these.

File list preview

You can check the way that the File List will be

displayed on the file list screen (see section 6.3).

• When Display is set to Customize

Set Display to Customize.
Turns the file size display on or off
Turns the display of the date

when the file was saved on or off
Set the save date display format

(year/month/day hour:minute:second,

year/month/day hour:minute,

abbreviated year/month/day hour:minute,

month/day hour:minute, hour:minute).
Set what to sort by (Date, File Name).
Set the sort order (A -> Z, Z -> A).
Turns the tree view on or off
Preview

See above.

Summary of Contents for AQ7280 OTDR




































































































































































































Search results

Summary of Contents for AQ7280 OTDR

Reviews:

Related manuals for AQ7280 OTDR

Brands by name

Popular brands

YOKOGAWA AQ7280 OTDR, User Manual

Search results

Summary of Contents for AQ7280 OTDR

Reviews:

Related manuals for AQ7280 OTDR

Brands by name

Popular brands