manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 49 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 49

5-4

IM AQ6370C-17EN

Turning the System Controller Function ON and OFF (On the AQ6370C, 
AQ6373 or AQ6375)

8.

  Press the 

SYSTEM CONTROLLER

 soft key to turn the function ON or OFF. 

 Turn it ON to control an external device. 

Setting the GP-IB Address of the Turnable Laser Source (for Synchronous 
Sweeping; On the AQ6370C, AQ6373 or AQ6375)

9.

  Press the 

TLS ADDRESS

 soft key. The TLS address setting screen is displayed. 

10.

 Set the TLS address using the 

rotary knob

 or the 

arrow keys,

 and press 

ENTER

. 

Explanation

Enter the following settings to control an external device with the instrument’s program 
function. 

Setting the GP-IB2 Port Address

When in Addressable mode, set the instrument's address within the following range. 
0 to 30
Each device that can be connected via GP-IB has its own unique GP-IB address. This 
address allows each device to be distinguished from other devices. Therefore, make 
sure not to set the same address on the instrument as any of the other devices. Also, set 
addresses other than the instrument’s GP-IB address (MY ADDRESS). 

Turning ON the System Controller Function

Turn ON this function to control an external device with the instrument's program 
function. 

Setting the TLS Address

Specify the GP-IB address of the turnable laser source to be controlled by the instrument. 

Note

•  A controller such as a PC that is connected to the GP-IB2 port cannot remotely control the 

AQ6370C/AQ6373/AQ6375. 

•  Even if a turnable laser source or an external device to be controlled by the AQ6370C/

AQ6373/AQ6375 using program functions is connected to the GP-IB1 port, it cannot remote 
control the AQ6370C/AQ6373/AQ6375.

•  The GP-IB1 and GP-IB2 ports are independent of each other. Thus, a controller connected 

to the GP-IB1 port cannot directly send a message to an external device connected to the 
GP-IB2 port. 

•  When a PC or other controller is connected to the GP-IB1 port, connecting the GP-IB1 port 

with the GP-IB2 port results in improper operation. Do not connect these ports together, or 
turn OFF the system controller function. The default is ON. 

5.3  Setting the GP-IB Address

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments