manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 209 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 209

8-48

IM AQ6370C-17EN

Program Command

Description

Instrument models on which the 

command is valid, parameter 

ranges, and supported variables.

GRID REFERENCE  

FREQ ***.*****THz

Inputs the reference frequency of 

the grid table.

AQ6370C/AQ6370D  

176.3486 to 299.7924 (0.0001 step)
AQ6375/AQ6375B  

125.0000 to 250.0000 (0.0001 step)

REMOTE INTERFACE: 

GP-IB

Sets the remote interface to GP-

IB

REMOTE 

INTERFACE:RS-232

Sets the remote interface to RS-

232

REMOTE 

INTERFACE:ETHERNET

Sets the remote interface to 

Ethernet

TLS ADDRESS **

Sets the GP-IB address of the 

turnable laser source used by the 

synchronous sweep function

AQ6370C/AQ6375

0 to 30 (1 step)

SELECT COLOR *

Selects the display color of the 

screen.

1 to 5 (1 step)

UNCAL WARNING 

DISPLAY ###

Displays UNCAL and warning.

###: ON/OFF

BUZZER CLICK ###

Turns the key press click sound 

ON/OFF

###: ON/OFF

BUZZER WARNING ###  Turns the warning/error buzzer 

ON/OFF

###: ON/OFF

LEVEL DISPLAY DIGIT * Sets the number of displayed 

digits (decimal place) of the level 

data displayed under the marker 

area and ANALYSIS results.

1 to 3 (1 step)

WINDOW TRANSPARENT 

###

Selects ON/OFF of the 

transparent display function for 

the split display and OVERVIEW 

window

###: ON/OFF

AUTO OFFSET ###

Turns auto offset ON/OFF.

###: ON/OFF

AUTO OFFSET INTERVAL 

*** min

Sets the time interval for executing 

the auto offset function

AQ6370C/AQ6370D/AQ6373/

AQ6373B/AQ6375B 
***: integer

TRIGGER INPUT 

SAMPLING TRIGGER 

Sets the trigger input mode 

tosampling trigger

TRIGGER INPUT SWEEP 

TRIGGER

Sets the trigger input mode to 

sweeptrigger

TRIGGER INPUT
SAMPLING ENABLE

Sets the trigger input mode to 

sampling enable

AQ6370C/AQ6370D/AQ6373B/

AQ6375B

TRIGGER OUTPUT
SWEEP STATUS

Sets the trigger output mode to 

sweep status

TRIGGER OUTPUT
OFF

Turns OFF the trigger output 

mode 

REMOVE USB 
STORAGE

Brings USB storage media online

8.3  Program Function Commands

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments