manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 167 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 167

8-6

IM AQ6370C-17EN

Editing Parameters

Modifying Parameters of an Entered Command

1.

  Select the line of the command whose parameter you wish to modify using the 

rotary knob

 or the 

arrow keys

. The PARAMETER EDIT soft key becomes 

enabled.

2.

  Press the 

PARAMETER EDIT

 soft key. The parameter setting screen is displayed. 

  

3.

  Enter the parameter and press the 

ENTER

 soft key. The parameter is set.

Note

The parameter setting screen displayed differs depending on the type of parameter. 

Inserting, Copying, or Deleting a Line

You can copy or delete the contents of a line. 

1.

  Press the 

CUT/COPY

 soft key. The CUT/COPY screen is displayed. 

 

 

  

Insert line 
Set range of lines for copy/delete 
Delete line 

Copy line 

Paste (overwrite)

Paste (insert)

  Inserting a Line

2.

  Select a line number on which to insert a line using the 

rotary knob

 or the 

arrow 

keys

.

3.

  Press the 

LINE INSERT

 soft key. One line is inserted above the selected line 

number. 

Note

If commands have been entered in all 200 lines, a new line cannot be inserted. 

8.1  Editing a Program

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments