manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 208 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 208

8-47

IM AQ6370C-17EN

Program Function

1 

2 

3 

4 

5 

6 

7 

8 

App 

Index 

SYSTEM

The following commands are not available on the AQ6373/AQ6373B
  All commands that start with “SYSTEM GRID”
The following commands are not available on the AQ6375/AQ6375B if the wavenumber 
markers are set.
  •  All commands that start with “SYSTEM GRID”
  •  All commands that start with “CUSTOM GRID”
  •  All commands that start with “GRID REFERENCE”

Program Command

Description

Instrument models on which the 

command is valid, parameter 

ranges, and supported variables.

OPTICAL ALIGNMENT

Aligns the optical axis of a 

monochromator optical system.

EXT OPTICAL
ALIGNMENT

Aligns the optical axis of a 

monochromator optical system 

using the external light source.

AQ6370D without the reference 

light source (-LO)

SELF WL CALIBRATION Sets the light source to be 

wavelength calibrated for the 

internal light source.

AQ6370C/AQ6370D/AQ6375/

AQ6375B

EXT WL CALIBRATION 

****.***nm

Sets the light source to be 

wavelength calibrated for the 

external light source (laser type)

AQ6370C/AQ6370D  

600.000 to 1700.000 (0.001 step)
AQ6373/AQ6373B  

350.000 to 1200.000 (0.001 step)
AQ6375/AQ6375B  

1200.000 to 2400.000 (0.001 step)

EXT-GAS 

WLCALIBRATION 

****.***nm

Sets the light source to be 

wavelength calibrated for the 

external light source (gas cell type)

AQ6370C/AQ6370D  

600.000 to 1700.000 (0.001 step)
AQ6375/AQ6375B  

1200.000 to 2400.000 (0.001 step)

EMIS LINE WL 

CALIBRATION ****. *** nm

Sets the light source to be 

wavelength calibrated for the 

external light source
(emission line light source type)

AQ6373B  

350.000 to 1200.000 (0.001 step)

WL SHIFT **.***nm

Sets the amount of wavelength 

shift.

–5.000 to 5,000 (0.001 step)

LEVEL SHIFT ***.***dB 

SYSTEM GRID 200GHz

Sets the amount of level shift.Sets 

system grid to a 200 GHz spacing 

grid table.

–60.000 to 60,000 (0.001 step)

SYSTEM GRID 100GHz

Sets system grid to a 100 GHz 

spacing grid table.

SYSTEM GRID 50GHz

Sets system grid to a 50 GHz 

spacing grid table.

SYSTEM GRID 25GHz

Sets system grid to a 25 GHz 

spacing grid table.

SYSTEM GRID 12.5GHz Sets system grid to a 12.5 GHz 

spacing grid table.

CUSTOM GRID STARTWL 

****.****nm

Inputs the user grid table 

startwavelength.

1000.0000 to 1700.0000
(0.0001 step)

CUSTOM GRID 

STARTFREQ ***.****THz

Inputs the user grid table 

startfrequency. 

176.3486 to 299.7924 (0.0001 step)

CUSTOM GRID STOP WL 

****.****nm

Inputs the user grid table 

stopwavelength.

1000.0000 to 1700.0000
(0.0001 step)

CUSTOM GRID 

STOPFREQ ***.****THz

Inputs the user grid table 

stopfrequency.

176.3486 to 299.7924 (0.0001 step)

CUSTOM GRID SPACING 

***.*GHz

Inputs the user grid table 

gridspacing.

0.1 to 999.9 (0.1 step)

GRID REFERENCE WL  

****.****nm

Inputs the reference wavelength 

of the grid table.

AQ6370C/AQ6370D

1000.0000 to 1700.0000

(0.0001 step)

AQ6375/AQ6375B

1200.0000 to 2400.0000

(0.0001 step)

8.3  Program Function Commands

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments