manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 163 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 163

8-2

IM AQ6370C-17EN

Entering a Program Name

4.

  Press the 

PROGRAM NAME

 soft key. 

 

The program name input screen appears. 

5.

  Enter a program name using the 

rotary knob

 and soft keys. 

6.

  After entering a name, press the 

DONE

 soft key. The program name is finalized, 

the instrument returns to the program registration screen. The entered program 
name is displayed in the program registration screen. 

 

Move input position

Insert characters
Delete characters
All clear
Enter characters

Finalize program name

Register/set entry characters

Note

  To register and reuse an entered string, or to use a previously entered string, press the 

PRESET WORD soft key. 

  Registering Strings

  After a string has been entered in the program name entry screen, press the PRESET 

WORD soft key. 

  Select a registration number and press the SAVE soft key. The entered string is 

registered in the program name input screen. 

  Using Registered Strings

  Press the PRESET WORD soft key. 
  Select the number of the string you wish to use and press the RECALL soft key. The 

selected string is entered as a program name. 

8.1  Editing a Program

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments