manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 205 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 205

8-44

IM AQ6370C-17EN

Program Command

Description

Instrument models on which the 

command is valid, parameter 

ranges, and supported variables.

READ SETTING EXT 

@@

Reads setting data of the file name 

specified by the variable @@ from 

external memory.

@@: A$, B$, C$, D$

READ DATA 

INT:’########.$$$’

Specifies a file name and reads 

datafrom internal memory.

’########.$$$’: file name

READ DATA 

EXT:’########.$$$’

Specifies a file name and reads 

datafrom external memory.

’########.$$$’: file name

READ DATA INT @@

Reads data in the file namespecified 

by thevariable @@ frominternal 

memory.

@@: A$, B$, C$, D$

READ DATA EXT @@

Reads data in the file name 

specifiedby the variable @@ from 

externalmemory.

@@: A$, B$, C$, D$

READ ALL TRACE 

INT:’########.CSV’

Specify a file name for all TRACE 

data and reads from internal 

memory.

 ’########.CSV’: file name

READ ALL TRACE 

EXT:’########.CSV’

Specify a file name for all TRACE 

data and reads from external 

memory.

 ’########.CSV’: file name

READ ALL TRACE INT 

@@

Reads all TRACE data under 

file names specified by the @@ 

variable from internal memory

@@: A$, B$, C$, D$

READ ALL TRACE EXT 

@@

Save all TRACE data under file 

names specified by the @@ 

variable from external memory.

@@: A$, B$, C$, D$

READ TEMPLATE 

EXT:’########.$$$’

Specifies a file name and reads a 

templatefrom external memory.

’########.$$$’: file name

READ TARGET LINE 

EXT:’########.$$$’

Specifies a file name and reads 

target line data from external 

memory.

’########.$$$’: file name

DELETE 

INT:’########.$$$’

Deletes files in internal memory

’########.$$$’: file name

DELETE 

EXT:’########.$$$’

Deletes files in external memory

’########.$$$’: file name

DELETE INT @@

Deletes files specified by the 

variable @@ from internal memory.

@@: A$, B$, C$, D$

DELETE EXT @@

Deletes files specified by the 

variable @@ from external memory.

@@: A$, B$, C$, D$

RENAME INT:## @@

Changes the names of files in 

internal memory specified by 

the variable ## to the file name 

specified by the variable @@.

##, @@: A$, B$, C$, D$

RENAME EXT:## @@

Changes the names of files in 

external memory specified by 

the variable ## to the file names 

specified by the variable @@.

##, @@: A$, B$, C$, D$

REMOVE USB STORAGE Brings USB storage media online
WRITE LOGGING
INT:#######.LG7

Specifies a file name and saves the 

logging data in internal memory.

AQ6375B
#######.LG7: file name

WRITE LOGGING
EXT:#######.LG7

Specifies a file name and saves the 

logging data in external memory.

AQ6375B
#######.LG7: file name

WRITE LOGGING
INT:#######.LG8

Specifies a file name and saves the 

logging data in internal memory.

AQ6370C/AQ6370D
#######.LG8: file name

WRITE LOGGING
EXT:#######.LG8

Specifies a file name and saves the 

logging data in external memory.

AQ6370C/AQ6370D
#######.LG8: file name

WRITE LOGGING
INT:#######.LG9

Specifies a file name and saves the 

logging data in internal memory.

AQ6370B
#######.LG9: file name

WRITE LOGGING
EXT:#######.LG9

Specifies a file name and saves the 

logging data in external memory.

AQ6370B
#######.LG9: file name

WRITE LOGGING
INT

Automatically assignes a file name 

and saves the logging data in 

internal memory.

AQ6370C/AQ6370D/AQ6373B/

AQ6375B

8.3  Program Function Commands

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments