manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 32 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 32

3-7

IM AQ6370C-17EN

Ethernet Interface

1 

2 

3 

4 

5 

6 

7 

8 

App 

Index 

Commands that are Necessary for Remote Control over the LAN

The authentication 

by OPEN command 

is required to remote control over 

 the LAN. 

Both the OPEN and CLOSE commands are also valid in AQ6317 mode. 

OPEN

Function 

Sends the user name and starts user authentication. 

Syntax

 OPEN<wsp>"username"

 

username = the user name

Example

 

OPEN "yokogawa"

 

-> AUTHENTICATE CRAM-MD5.

Explanation  Authentication is carried out with the OPEN command as follows. 
 

For Plain Text Authentication

 

1. Send OPEN "username" to the AQ6370C/AQ6370D/AQ6373/AQ6373B/AQ6375/

AQ6375B. The response message is received from the AQ6370C/AQ6370D/
AQ6373/AQ6373B/AQ6375/AQ6375B.

 

2. Confirm that the received message is "AUTHENTICATE CRAM-MD5." 

 

3. Send the password to the AQ6370C/AQ6370D/AQ6373/AQ6373B/AQ6375/

AQ6375B (anything can be input if the user name is anonymous). 

 

4. If the message, "READY" is received from the AQ6370C/AQ6370D/AQ6373/

AQ6373B/AQ6375/AQ6375B, authentication was successful. The AQ6370C/
AQ6370D/AQ6373/AQ6373B/AQ6375/AQ6375B's REMOTE indicator lights, and 
sending of remote commands is enabled. If the user name and password are 
incorrect, authentication fails and the connections is closed. 

 

For Encrypted Authentication

 

1. Send OPEN "username" to the AQ6370C/AQ6370D/AQ6373/AQ6373B/AQ6375/

AQ6375B. The response message is received from the AQ6370C/AQ6370D/
AQ6373/AQ6373B/AQ6375/AQ6375B. 

 

2. Confirm that the received message is "AUTHENTICATE CRAM-MD5." 

 

3. Send "AUTHENTICATE CRAM-MD5 OK" to the AQ6370C/AQ6370D/AQ6373/

AQ6373B/AQ6375/AQ6375B. The response message (challenge string) is received 
from the AQ6370C/AQ6370D/AQ6373/AQ6373B/AQ6375/AQ6375B. 

 

4. The received challenge string and password are processed with an MD5 hash 

algorithm (anything can be input if the user name is anonymous). 

 

5. Send the returned hash data (as a 32-character hexadecimal string in lower case) 

to the AQ6370C/AQ6370D/AQ6373/AQ6373B/AQ6375/AQ6375B, and receive the 
response message. 

 

6. If the message, "READY" is received from the AQ6370C/AQ6370D/AQ6373/

AQ6373B/AQ6375/AQ6375B, authentication was successful. The AQ6370C/
AQ6370D/AQ6373/AQ6373B/AQ6375/AQ6375B's REMOTE indicator lights, and 
sending of remote commands is enabled. If the user name and password are 
incorrect, authentication fails and the connection is closed. 

CLOSE

Function 

Closes the connection (turns it OFF), and switches to local mode. 

Syntax

 CLOSE

Example

 CLOSE

3.2  Setting Up Ethernet

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments