manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 29 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 29

3-4

IM AQ6370C-17EN

Configuring the Remote Monitor Settings (On the AQ6370C/AQ6370D/
AQ6373B/AQ6375B)

21.

 Press the 

REMOTE MONITOR

 soft key. The remote monitor setup menu appears.

22.

 Press the 

MONITOR PORT

 soft key. Each time you press the soft key, the setting 

toggles between ON and OFF. Remote monitoring is possible when the setting is 
ON.

 

 

  

Turns the monitor port on and off. 

Set the port number (fixed).

Disconnects the monitor connection

•  Disconnecting the Monitor Connection

23.

 Press the 

DISCONNECT

 soft key. The monitor connection from the PC is 

disconnected.

Setting Directory Sharing (Only on the AQ6370D/AQ6373B/AQ6375B)

24.

 Press the 

FOLDER SHARING

 soft key. A directory sharing setup menu appears.

25.

 Press the 

READ ONLY

 soft key. The user area directory of the AQ6370D/

AQ6373B/AQ6375B is shared (read only).

 

 

  

Disables directory sharing

Enables directory sharing

•  Disabling Directory Sharing

26.

 Press the 

DISABLE

 soft key. The sharing of the user area directory is disabled.

Explanation

TCP/IP Settings

It is necessary to set up the IP address for correct use of the instrument.
If a DHCP server is provided on the network to which this instrument is connected, the 
IP address given to the instrument is automatically set. Thus, set the item IP ADDRESS 
SETTING under SYSTEM <NETWORK SETTING><TCP/IP SETTING> to “AUTO.” 
Please ask your network administrator for details about network connections. 

Note

•  If you start the AQ6370C/AQ6370D/AQ6373/AQ6373B/AQ6375/AQ6375B when it is 

connected to a network, it may take a few minutes for the start procedure to finish. (The 
progress of initialization is indicated at the bottom of the screen with indications from “STEP 
1/9” to “STEP 9/9.”)

•  When the start procedure is finished and the measurement screen appears, it may take 

a few more minutes before you can access the AQ6370C/AQ6370D/AQ6373/AQ6373B/
AQ6375/AQ6375B from a PC over the network. In addition, the DONE key of TCP/IP 
settings may be unavailable for a certain time.

3.2  Setting Up Ethernet

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments