manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 172 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 172

8-11

IM AQ6370C-17EN

Program Function

1 

2 

3 

4 

5 

6 

7 

8 

App 

Index 

Displaying the OUTPUT WINDOW

1.

 Press 

PROGRAM

.

 

The program menu is displayed. 

2.

  Press the 

OUTPUT WINDOW

 soft key. The OUTPUT WINDOW is displayed. 

  

Close OUTPUT 

WINDOW

Note

If there is no data to display in the OUTPUT WINDOW, the OUTPUT WINDOW soft key is 
disabled. Data and characters output by the DATA OUTPUT command are displayed. 

3.

  To output the contents of the OUTPUT WINDOW to the built-in printer, press the 

PRINT OUTPUT WIN

 soft key (On the AQ6370C, AQ6373 or AQ6375). 

4.

  To close the OUTPUT WINDOW, press the 

CLOSE WINDOW

 soft key. 

Note

•  The contents of the OUTPUT WINDOW are held until execution of the OUTPUT WINDOW 

CLEAR special command. 

•  The contents of the OUTPUT WINDOW can be stored in a file. See the main unit user’s 

manual (IM AQ6370C-01EN, IM AQ6370D-01EN,IM AQ6373-01EN, IM AQ6373B-01EN, IM 
AQ6375-01EN or IM AQ6375B-01EN) for details. 

•  If the contents of the OUTPUT WINDOW exceeds 200 lines, data will be erased beginning 

from the first line, in turn.

•  Turning off the power switch on the instrument erases data in the OUTPUT WINDOW. 

8.2  Executing a Program

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments