manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 20 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 20

2-7

IM AQ6370C-17EN

GP-IB Interface (GP-IB1 Port)

1 

2 

3 

4 

5 

6 

7 

8 

App 

Index 

2.5  Responses to Interface Messages

 Responses to Interface Messages

Responses to Uniline Messages

IFC (Interface Clear)

  Clears talker and listener. Output is cancelled if outputting data. 

REN (Remote Enable)

  Switches between Local and Remote. 

IDY (Identify) is not supported. 

Responses to Multiline Messages (Address Commands)

GTL (Go To Local)

  Switches to Local mode. 

SDC (Selected Device Clear)

•  Clears program messages (commands) being received, and the output queue. 
•  The *OPC and *OPC? commands are invalid during execution. 
•  The *WAI command closes immediately. 

PPC (parallel poll configure), GET (group execute trigger), and TCT (take control) are not 
supported. 

Responses to Multiline Messages (Universal Commands)

LLO (Local Lockout)

  Disables the front panel SHIFT+CLEAR operation, and prohibits switching to Local 

mode. 

DCL (Device Clear)

  Same operation as SDC. 

SPE (Serial Poll Enable)

  Places the talker function of all devices on the bus in Serial poll mode. The controller 

polls each device in order. 

SPD (Serial Poll Disable)

  Cancels Serial poll mode for the talker function of all devices on the bus. 

PPU (Parallel Poll Unconfigure) is not supported. 

Definition of Interface Messages

Interface messages

 are also called 

interface commands 

or 

bus commands

, and are 

commands that are issued from the controller. Interface messages come in the following 
categories. 

Uniline Messages

A message is sent through a single command line. The following are the three types of 
uniline messages. 
  IFC (Interface Clear)
  REN (Remote Enable)
  IDY (Identify)

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments