YOKOGAWA AQ6370C User Manual Download Page 109

Page: 109 / 240

7-49

IM AQ6370C-17EN

Remote Commands

App

Index

:CALCulate:DATA?

Function

Queries the analysis results.

Syntax

:CALCulate:DATA?

Example

:CALCULATE:DATA?

Explanation • Queries the analysis results from the last time

analysis was executed.

• If the analysis function has not been executed,

a query error occurs.

• For a response example, see section 7.7,

“Output Format of Analysis Results.”

• This is a sequential command.

:CALCulate:DATA:CGAin?

Function

Queries the gain value of the EDFA-NF analysis
results.

Syntax

:CALCulate:DATA:CGAin?

Example

:CALCULATE:DATA:CGAin?

-> +1.00001,+1.00001

Explanation • If the analysis function has not been executed,

a query error occurs.

• “0” is returned if there is no relevant return

value (such as if the analysis executed was
not EDFA-NF analysis)

• The number of channels to be output can be

acquired by the

:CALCulate:DATA:

NCHannels?

command.

• Data is output in either ASCII or binary form,

depending on the setting of

:FORMat[:

DATA]

• With the AQ6373/AQ6373B, the command is

invalid.

• This is a sequential command.

:CALCulate:DATA:CNF?

Function

Queries the NF value of the EDFA-NF analysis
results.

Syntax

:CALCulate:DATA:CNF?

Example

:CALCULATE:DATA:CNF? ->

+1.00001,+1.00001

Explanation • If

:CALCulate[:IMMediate]

has not been

executed, a query error occurs.

• “0” is returned if there is no relevant return

value (such as if the analysis executed was
not EDFA-NF analysis)

• The number of channels to be output can be

acquired

by the

:CALCulate:DATA:

NCHannels?

command.

• Data is output in either ASCII or binary form,

depending on the setting of

:FORMat[:

DATA]

• With the AQ6373/AQ6373B, the command is

invalid.

• This is a sequential command.

:CALCulate:DATA:CPOWers?

Function

Queries the level value of the OSNR(WDM),
WDM, EDFA-NF, WDM FIL-PK, or WDM FIL-
BTM analysis results.

Syntax

:CALCulate:DATA:CPOWers?

Example

:CALCULATE:DATA:CPOWERS? ->

+1.00001,+1.00001

Explanation • If the analysis function has not been executed,

a query error occurs.

• “0” is returned if there is no relevant return

value.

• The number of channels to be output can be

acquired by the

:CALCulate:DATA:

NCHannels?

command.

• The value to be output depends on the

analysis performed.

OSNR(WDM): LEVEL or MEAS LEVEL

WDM:

LEVEL or MEAS LEVEL

EDFA-NF:

INPUT LEVEL

WDM FIL-PK: PEAK LEVEL

(output even if SW is OFF)

WDM FIL-BTM: PEAK LEVEL

(output even if SW is OFF)

• Data is output in either ASCII or binary form,

depending on the setting of

:FORMat[:DATA]

• This is a sequential command.

:CALCulate:DATA:CSNR?

Function

Queries the SNR value from the last time WDM
analysis was executed.

Syntax

:CALCulate:DATA:CSNR?

Example

:CALCULATE:DATA:CSNR? ->
+4.00001,+4.00001

Explanation • If the analysis function has not been executed,

a query error occurs.

• “0” is returned if there is no relevant return

value (for example, if analysis made is other
than WDM analysis).

• The number of channels to be output can be

acquired by the

:CALCulate:DATA:

NCHannels?

command.

• Data is output in either ASCII or binary form,

depending on the setting of

:FORMat[:

DATA]

• This is a sequential command.

7.6 Instrument-Specific Commands

Summary of Contents for AQ6370C

















































































































































































































































Search results

Summary of Contents for AQ6370C

Reviews:

YOKOGAWA AQ6370C, User Manual, Page: 109 / 240

Search results

Summary of Contents for AQ6370C

Reviews: