manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 191 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 191

8-30

IM AQ6370C-17EN

DISPLAY

Program Command Description

Instrument models on which the 

command is valid, parameter ranges, 

and supported variables.

NORMAL DISPLAY

Sets the screen into normal 

display mode.

SPLIT DISPLAY

Sets the screen into split display 

mode.

TRACE # UPPER

Sets trace # to the top screen of 

the  split display. 

#: A to G

TRACE # LOWER

Sets trace # to the bottom 

screen of the split display. 

#: A to G

UPPER HOLD ###

Holds the top screen of the of  

split display.

###: ON/OFF

LOWER HOLD ###

Holds the bottom screen of the  

split display

###: ON/OFF

LABEL ’---56 chars---’ Displays a label comment in the  

label area. If a semicolon ( ; ) is  

added to the end, the comment  

(variable value) specified by the  

next LABEL command is displayed.

LABEL @@@@@

Sets the contents of variable  

@@@@@ to the label area

AQ6370C/AQ6370D
@@@@@: E

1

, G, H, I, J, K, O

1

, 

P, Q, R, S, T

1

, U

1

, V

1

, X, Y, Z, WM, 

W1, W2, W(CH), W2-W1, LM, L1, 

L2, L2-L1, L(CH), SPWD, MEANWL, 

PKWL, PKLVL, MODN, GONO, SMSR, 

SMSR2, WDMCHN, WDMWL(CH), 

WDMLVL(CH), WDMSNR(CH), NFCHN, 

NFWL(CH), NFLVLI(CH), NFLVLO(CH), 

NFASELV(CH), NFGAIN(CH), NFNF(CH), 

MKPWR, PMD, M, N, CH, A$, B$, C$, 

D$, FILE$, TIME$, WAM1, WAM2, 

WAM3, WAM4, WAM2-WAM1, WAM4-

WAM3, LAM1, LAM2, LAM3, LAM4, 

LAM2-LAM1, LAM4-LAM3

LABEL @@@@@;

Sets the contents of variable 

@@@@@ to the label display. 

The comment (variable value) 

specified by the next LABEL  

command is displayed.

AQ6370C/AQ6370D
@@@@@: E

1

, G, H, I, J, K, O

1

, 

P, Q, R, S, T

1

, U

1

, V

1

, X, Y, Z, WM, 

W1, W2, W(CH), W2-W1, LM, L1, 

L2, L2-L1, L(CH), SPWD, MEANWL, 

PKWL, PKLVL, MODN, GONO, SMSR, 

SMSR2, WDMCHN, WDMWL(CH), 

WDMLVL(CH), WDMSNR(CH), NFCHN, 

NFWL(CH), NFLVLI(CH), NFLVLO(CH), 

NFASELV(CH), NFGAIN(CH), NFNF(CH), 

MKPWR, PMD, M, N, CH, A$, B$, C$, 

D$, FILE$, TIME$, WAM1, WAM2, 

WAM3, WAM4, WAM2-WAM1, WAM4-

WAM3, LAM1, LAM2, LAM3, LAM4, 

LAM2-LAM1, LAM4-LAM3

LABEL CLEAR

Clears the LABEL command in 

the label area.

NOISE MASK ***dB

Displays waveform data with the 

data at or below the set level 

masked

OFF (–999),  –100 to 0 (1 step) 

8.3  Program Function Commands

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments