manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 104 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 104

7-44

IM AQ6370C-17EN

:CALCulate:AMARker[1|2|3|4]:FUNCtion
:INTegral:IRANge

Function 

Sets or queries the integration frequency range 
of the specified integrated power marker.

Syntax

 :CALCulate:AMARker[1|2|3|4]:FUNCtio

n:INTegral:IRANge<wsp><NRf>[Hz]

 :CALCulate:AMARker[1|2|3|4]:FUNCtio

n:INTegral:IRANge?

 

[1|2|3|4]: Advanced marker number

 

<NRf> = Integration frequency range [Hz]

Example

 :CALCULATE:AMARKER:FUNCTION:INTEGRA

L:IRANge 40GHz

 :CALCULATE:AMARKER:FUNCTION:INTEGRA

L:IRANge? -> 4.00010

Description  •  An execution error will occur if the specified 

advanced marker has not been assigned or is 
not an integrated power marker.

 

•  A query error will occur if the specified 

advanced marker has not been assigned or is 
not an integrated power marker.

 

•  If the advanced marker number is not 

specified, advanced marker 1 will be used.

 

•  This is a sequential command.

 

•  This command can be used on the AQ6370C/

AQ6370D/AQ6373B/AQ6375B.

:CALCulate:AMARker[1|2|3|4]:FUNCtion
:INTegral:RESult?

Function 

Queries the integration value of the specified 
integrated power marker.

Syntax

 :CALCulate:AMARker[1|2|3|4]:FUNCtio

n:INTegral:RESult?

 

[1|2|3|4]: Advanced marker number

Example

 :CALCULATE:AMARKER:FUNCTION:INTEGRA

L:RESULT? -> -1.00001

Description  •  The unit of the returned marker level depends 

on the Y-axis unit of the assigned marker trace.

 

•  A query error will occur if the specified 

advanced marker has not been assigned or is 
not an integrated power marker.

 

•  If the advanced marker number is not 

specified, advanced marker 1 will be used.

 

•  This is a sequential command.

 

•  This command can be used on the AQ6370C/

AQ6370D/AQ6373B/AQ6375B.

:CALCulate:AMARker[1|2|3|4]:FUNCtion
:INTegral[:STATe]

Function 

Moves the specified integrated power marker to 
the center of the marker trace.

 

Also queries the status of the specified 
integrated power marker.

Syntax

 :CALCulate:AMARker[1|2|3|4]:FUNCtion:I

NTegral[:STATe]<wsp>OFF|ON|0|1

 :CALCulate:AMARker[1|2|3|4]:FUNCtion

:INTegral[:STATe]?

 

[1|2|3|4]: Advanced marker number

 

Response  0 = Off, 1 = On

Example

 :CALCULATE:AMARKER:FUNCTION:INTEGR

AL ON

 :CALCULATE:AMARKER:FUNCTION:INTEGR

AL? -> 1

Description  •  If an integrated power marker 

is assigned, moving markers 
(:CALCulate:AMARker[1|2|3|4][:STATe]) and 
power spectral density markers (:CALCulate:
AMARker[1|2|3|4]:FUNCtion:PDENsity|:NOIS
e[:STATe]) will be set to off.

 

•  If this command with the parameter set to 

OFF is specified on an advanced marker 
that has been assigned to integrated power 
marker, the advanced marker will change to a 
moving marker.

 

  If the advanced marker has not been 

assigned, using this command with the 
parameter set to OFF will leave the advanced 
marker unassigned.

 

•  If the advanced marker number is not 

specified, advanced marker 1 will be used.

 

•  This is a sequential command.

 

•  This command can be used on the AQ6370C/

AQ6370D/AQ6373B/AQ6375B.

7.6  Instrument-Specific Commands

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments