manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 46 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 46

5-1

IM AQ6370C-17EN

GP-IB Interface (GP-IB2 port)

1 

2 

3 

4 

5 

6 

7 

8 

App 

Index 

5.1  Connecting via GP-IB2

GP-IB Cable

This instrument is equipped with an IEEE standard 488-1978 24-pin GP-IB connector. 
Use a GP-IB cable that conforms to the IEEE standard 488-1978. 

Connections

The instrument has two ports, GP-IB1 and GP-IB2. The GP-IB2 port is not available on 
the AQ6370D/AQ6373B/AQ6375B.
GP-IB1 port:  Can be connected to a PC for remote control of the instrument from the PC.
GP-IB2 port:  Can be connected to another instrument for remote control of that 

instrument using the AQ6370C/AQ6373/AQ6375’s program function. 

For now, you will connect a PC to the GP-IB2 port. 
Turn OFF all the power switches of the AQ6370C/AQ6373/AQ6375 and any devices 
to be connected to it. Connect a cable to the GP-IB2 port on the rear panel of the 
instrument. 

 CAUTION

Always turn OFF the power to the instrument and the PC when connecting or 
disconnecting communication cables. Failure to turn OFF the power can result in 
malfunction or damage to internal circuitry. 

French

 ATTENTION

Veillez à mettre le PC et l'oscilloscope DLM4000 hors tension lorsque vous 
branchez ou débranchez les câbles de communication, car cela risquerait de 
provoquer des dysfonctionnements ou des courts-circuits internes.

  

GP-IB1

GP-IB2

AQ6370C/AQ6373/AQ6375

For precautions when making connections, see chapter 2, section 2.1, “Connecting via 
GP-IB.” 

Chapter 5 

GP-IB Interface (GP-IB2 Port )

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments