manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 27 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 27

3-2

IM AQ6370C-17EN

3.2  Setting Up Ethernet

Procedure

Selecting the Communication Interface

1.

 Press 

SYSTEM

. The system setting menu is displayed. 

2.

  Press the 

MORE1/4

 soft key. The communication interface setting menu is 

displayed. 

3.

  Press the 

REMOTE INTERFACE

 soft key. The setting menu for the interface to 

be used is displayed. 

4.

 

In AQ6370D (R02.01 or later), press the 

NETWORK(SOCKET) 

or 

NETWORK(VXI-11)

 

soft key to set the communication interface to Ethernet.

 

In models other than AQ6370D, press the 

ETHERNET

 soft key to set the 

communication interface to Ethernet.

 

 

   

NETWORK(SOCKET)(AQ6370D)

NETWORK(except for AQ6370D)
NETWORK(VXI-11)(AQ6370D)

Setting Up TCP/IP

5.

  Press the 

NETWORK SETTING

 soft key. The ethernet setting menu is displayed.

6.

  Press the 

TCP/IP SETTING

 soft key. The TCP/IP setting menu is displayed. 

7.

  Using the 

<, > soft keys, select AUTO (DHCP) or MANUAL. 

8.

  Press the 

SELECT

 soft key. The item is selected. 

 

 

  

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments