manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 204 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 204

8-43

IM AQ6370C-17EN

Program Function

1 

2 

3 

4 

5 

6 

7 

8 

App 

Index 

Program Command

Description

Instrument models on which the 

command is valid, parameter 

ranges, and supported variables.

WRITE DATA 

INT:’########.***’

Specifies a file name and saves 

data to internal memory.

’########.***’: file name

WRITE DATA 

EXT:’########.***’

Specifies a file name and saves 

datato external memory.

’########.***’: file name

WRITE DATA INT

Specifies a file name and saves 

datato internal memory. File names 

are assigned automatically.

WRITE DATA EXT

Specifies a file name and saves 

data to external memory. File 

names are assigned automatically.

WRITE DATA INT @@

Specifies a file name and saves 

dataunder the file name specified 

by the variable @@ in internal 

memory.

@@: A$, B$, C$, D$

WRITE DATA EXT @@

Specifies a file name and saves 

dataunder the file name specified 

by the variable @@ in external 

memory. 

@@: A$, B$, C$, D$

DATA DATE&TIME ###

Selects ON/OFF of date and time 

output.

###: ON/OFF

DATA LABEL ###

Selects ON/OFF of label output.

###: ON/OFF

DATA DATA AREA ###

Selects ON/OFF of data area 

output.

###: ON/OFF

DATA CONDITION ###

Selects ON/OFF of measuring 

conditions output.

###: ON/OFF

DATA TRACE DATA ### Selects ON/OFF of waveform data 

output.

###: ON/OFF

DATA OUTPUT WINDOW 

###

Selects ON/OFF of contents 

output  of the OUTPUT WINDOW 

PROGRAM function .

###: ON/OFF

READ TRACE # 

INT:’########.$$$’

Assigns a file name to specified 

TRACE data and reads it 

frominternal memory.

’########.$$$’: file name
#: A, B, C, D, E, F, G

READ TRACE # 

EXT:’########.$$$’

Assigns a file name to specified 

TRACE data and reads it from 

external memory.

’########.$$$’: file name
#: A, B, C, D, E, F, G

READ TRACE # INT @@ Reads TRACE data in the file 

namespecified by the variable @@ 

frominternal memory.

#: A, B, C, D, E, F, G
@@: A$, B$, C$, D$

READ TRACE # EXT @@ Reads TRACE data in the file 

namespecified by the variable @@ 

fromexternal memory.

#: A, B, C, D, E, F, G
@@: A$, B$, C$, D$

READ MEMORY 

**INT:’########.$$$’

Specifies a file name and 

readsmemory data from internal 

memory.

’########.$$$’: file name
0 to 63 (1 step)

READ MEMORY ** 

EXT:’########.$$$’

Specifies a file name and 

readsmemory data from external 

memory.

’########.$$$’: file name
0 to 63 (1 step)

READ MEMORY ** INT 

@@

Reads memory data in the file 

namespecified by the  variable @@ 

frominternal memory.

**: 0 to 63 (1 step)
@@: A$, B$, C$, D$

READ MEMORY ** 

Reads memory data in the file 

namespecified by the variable @@ 

fromexternal memory.

**: 0 to 63 (1 step)
@@: A$, B$, C$, D$

READ SETTING 

INT:’########.$$$’

Specifies a file name and reads 

setting data from internal memory.

’########.$$$’: file name

READ SETTING 

EXT:’########.$$$’

Specifies a file name and saves 

setting data from external memory.

’########.$$$’: file name

READ SETTING INT @@ Reads setting data of the file name 

specified by the variable @@ from 

internal memory.

@@: A$, B$, C$, D$

8.3  Program Function Commands

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments