manualshive.com logo in svg

YOKOGAWA AQ6370C, User Manual, Page: 42 / 240

Share
Download
YOKOGAWA AQ6370C User Manual Download Page 42

4-4

IM AQ6370C-17EN

4.2  Remote Control Using Commands

The AQ6370C/AQ6370D/AQ6373/AQ6373B/AQ6375/AQ6375B can be controlled 
remotely using the RS-232 port. When controlling the instrument remotely, use a cross 
cable to connect the instrument to the PC. Also, remote commands are the same as for 
remote control via GP-IB. 

Interrupt by SRQ

An SRQ interrupt does not occur during RS-232-based remote control. 

Status Registers

The status registers operate in the same manner as in remote control via the GP-IB 
interface. Using the “*STB?” or “SPOLL?” command dedicated for remote control using 
the LAN port allows you to read the status registers, as in the case with serial polling via 
the GP-IB interface. 
  *STB?:     When AQ6370C/AQ6370D/AQ6373/AQ6373B/AQ6375/AQ6375B is the 

setting of the COMMAND FORMAT key

  SPOLL?:  When AQ6317 is the setting of the COMMAND FORMAT key

Delimiter

The delimiter for RS-232-based remote control is fixed to CR + LF. 

Transmission of Talker Data

When the instrument receives talker data from an external PC, the data is sent to the 
external PC’s buffer. It receives the external PC's buffer data and stores the query data.

Summary of Contents for AQ6370C

















































































































































































































































Reviews:

No comments