YOKOGAWA AQ6370C User Manual Download Page 175

Page: 175 / 240

8-14

IM AQ6370C-17EN

No. Message

Cause

Instrument models

on which the

command is valid

360 Disk full

No file can be created due to insufficient free

space in the external memory.

361 Disk not inserted

No external memory is connected.

362 Disk is write protected

The external memory is write protected.

363 Disk not initialized

External memory is not initialized. Or, it has

been formatted in a format not supported by

this instrument.

364 Directory full

Directory is full, therefore no file can be

created.

365 File not found

The specified file cannot be read because

it has not been found. Or, the file does not

exist on the disk.

366 File is write protected

The file is specified to be read only, so that it

cannot be rewritten or deleted.

367 No data

No data to store.

368 File is not a trace file

A file cannot be read because it is not a trace

file.

369 Illegal file name

A file cannot be saved due to an incorrect file

name.

371 Directory already exist

Unable to make the directory because a

directory with the same name already exists.

380 Undefined program

An attempt was made to run a program that

is not defined.

381 Syntax error

Command incorrect. (a program has been

rewritten for some reason)

382 Program nesting over

Nesting is not possible because the program

nesting is already too deep.

383 Program reentrant error The destination of the GOTO command is set

to its own program number. This will create

an infinite loop.

8.2 Executing a Program

Summary of Contents for AQ6370C

















































































































































































































































Search results

Summary of Contents for AQ6370C

Reviews:

YOKOGAWA AQ6370C, User Manual, Page: 175 / 240

Search results

Summary of Contents for AQ6370C

Reviews: