YATO YT-85460, Original Instructions Manual

Page: 19 / 104

19
O R I G I N A L I N S T R U C T I O N S
GB
Spare parts
For a detailed list of spare parts for the appliance go to the
“Download” section in the Product tab on the TOYA SA website:
www.toya.pl.
compressed air jet at a pressure of 0.3 MPa or less. Pay par-
ticular attention to the permeability of the ventilation slots.
Store the generator in a horizontal position.
Store the generator in a dry, well-ventilated and covered room.
Transporting the generator
WARNING! The generator must always be transported with the
combustion engine stopped and the consumers disconnected.
For short distances, e.g. when moving the generator at the point
of use, the generator must be transported holding it by the frame.
Be careful not to swing or tilt the generator to spill fuel. The
generator may be hot, stay cautious to avoid burns.
For longer transport distances, the generator must be prepared
for transport according to the procedure described under “Stor-
age of the generator”. The generator must be transported in a
horizontal position. Secure the machine with belts to prevent it
from tipping over during transport.
ENVIRONMENTAL PROTECTION
Correct disposal of this product: This marking shown on
the product and its literature indicates this kind of product
mustn’t be disposed with household wastes at the end of its wor-
king life in order to prevent possible harm to the environment or
human health. Therefore the customers is invited to supply to the
correct disposal, diff erentiating this product from other types of
refusals and recycle it in responsible way, in order to re - use this
components. The customer therefore is invited to contact the lo-
cal supplier offi ce for the relative information to the diff erentiated
collection and the recycling of this type of product.
TECHNICAL PARAMETERS
Generator type YT-85460
Parameter Measure Unit Value
ELECTRIC GENERATOR
Rated voltage
[V] A.C. 230
[V] A. C. 400 (3P/N/PE)
[V] D.C. 12
Rated frequency [Hz] 50
Generator rated power COP [W] 4250
Maximum power (S2 5 min) [W] 5500
Power factor 1.0
Rated current (A.C.) [A] 5.2
Rated current (D.C.) [A] 8.3
Electric insulation class I
Degree of protection of the housing (IP) IP23M
Performance class G1
Quality class A
MECHANICAL ENGINE
Type CP188F
Number of cylinders 1
Number of strokes 4
Fuel type Unleaded petrol
Type of oil [SAE] 10W-40
Fuel consumption (at 75% load) [l/h] 4.27
Engine capacity [cm 3 ] 389
Rated power [kW] 7.5
Rated speed [min
-1
] 3600
Idling speed revolutions [min -1 ] 1800 ± 100
Cooling Air cooling
Compression stage 8.5:1
Fuel tank capacity [l] 25
Oil tank capacity [l] 1.1
Spark plug type F7RTC
DEVICE
Overall dimensions [mm] 680 x 510 x 540
Weight [kg] 85
Operating temperature range [ O C] 0 ÷ +40
Maximum operating altitude [metres above the sea level] 1000
Noise level
Sound pressure L
pA
±K [dB(A)] 75,0±2,62
Sound power L
wA
±K [dB(A)] 93.7±2.62