Home
/
YASKAWA
/
SIGMA-7 Series
/
Product Manual

YASKAWA SIGMA-7 Series, Product Manual, Page: 157 / 187

Share

Page: 157 / 187

YASKAWA SIGMA-7 Series Product Manual Download Page 157

7.2 Installation Procedure

7.2.3 SGLT Servomotors (Models with T-type Iron Cores)

7-10

7.2.3

SGLT Servomotors (Models with T-type Iron Cores)

Outline

1.

Mount one Magnetic Way.

2.

Separate the moving table that is supported by the linear motion guides from the Mag-
netic Way and attach the Moving Coil to it.

3.

Place the Moving Coil on top of the Magnetic Way.

4.

Attach the second and any other Magnetic Ways.

To install the Moving Coil, you need a Magnetic Way that is longer than the Moving Coil. If
one Magnetic Way is shorter than the Moving Coil, install two Magnetic Ways first and then
install the Moving Coil.

If you will use only one Magnetic Way, the linear motion guide may not be sufficiently long
enough to install the Moving Coil at a location separated from the Magnetic Way. Install a
dummy linear motion guide and use it to mount the Moving Coil.

Important

Linear motion guide

Magnetic Way

Moving table

Moving Coil

Important

Magnetic Way

Proper linear motion guide

Dummy linear motion guide

Moving
table

Blocks

Moving Coil

Moving Coil

Second and any other Magnetic Ways

«
...
155
156
157
158
159
...
»

Summary of Contents for SIGMA-7 Series




























































































































































































Reviews:

No comments