manualshive.com logo in svg

YASKAWA SIGMA-7 Series, Product Manual, Page: 149 / 187

Share
Download
YASKAWA SIGMA-7 Series Product Manual Download Page 149

7.1  Installation Conditions

7.1.1  Installation Environment

7-2

7.1

Installation Conditions

The service life of a Servomotor will be shortened or unexpected problems will occur if the Ser-
vomotor is installed incorrectly or in an inappropriate location. Always observe the following 
installation instructions.

7.1.1

Installation Environment

Refer to the specifications for each type of Servomotor for the mechanical specifications, pro-
tective structure, and environmental conditions related to Servomotor installation.

7.1.2

Installation Orientation

You can install the Servomotor in any orientation.

Installation Orientation

Figure

Precautions

Horizontal Direction

−

Hung

Install a mechanism on the equipment to pro-
vide protection in case the Servomotor falls 
off.

Vertical Direction 
(Stroke in Vertical Direc-
tion)

•

Implement safety measures, such as attach-
ing a counterbalance, so that the workpiece 
will not fall, e.g., when an alarm occurs, 
when overtravel occurs, or when the power 
supply is interrupted.

•

Set the parameters so that the Servomotor 
will stop in the zero clamping state when 
overtravel occurs.

Summary of Contents for SIGMA-7 Series




























































































































































































Reviews:

No comments