Yamatake MagneW3000 PLUS, User Manual

Page: 42 / 134

3 - 1
Chapter 3 - Operating and Stopping of the Measuring System
Outline of this
chapter This chapter explains the procedures for starting up this product and making
zero adjustment. It also describes stopping the system.
When starting up and operating this product for the first time, carefully follow
the explanation given in this chapter.
Two kinds of zero adjustment are available with this product:
• Using the data setting device that may be included with this product
• Using communications between the S-SFC and this product
(Refer to S-SFC User's Manual CM2-SFC100-2001.)
For an electromagnetic flowmeter with no data setting device, select the
method that uses the S-SFC.
Both methods allow zeroing the flowmeter and employ a data setting device.
Before using this product, be sure to perform the following settings as
instructed in this chapter.
• Setting the write protect level
• Setting whether or not communications are used
• Setting the empty detection function