4 - 18
Setting/Changing the Preset Value of the Built-in Flow Counter
Introduction
This changes the contact output status from H to L or from L to H when the
flow counter reaches a preset value.
This function is used when contact output has been selected (additional speci-
fication) and pulse output has been selected (additional specification).
Also, be sure to select the preset counter for the contact output in function
setting.
Default setting
The preset value is set to “0000000000” at shipment.
Setting range
0000000000 - 9999999999
Open the built-in flow counter
preset value setup screen by
following the steps to enter the
Operator’s Mode.
2
Touch the key to move the
cursor to the desired digits. In
this example, the cursor is
moved to the “2” position by
touching the key five times.
3
Touch the or key to set
the desired numbers.
In this case, the numeral “2” is
changed to “5” by five touches
of the Increment key.
4
When the counter reset value
has been changed, touch the
key to return the cursor to
the “*”.
Screen
Procedure
Step
1
*
COUNTER PRESET
0 0 0 0 2 0 0 0 0 0
*
COUNTER PRESET
0 0 0 0 2 0 0 0 0 0
*
COUNTER PRESET
0 0 0 0 5 0 0 0 0 0
*
COUNTER PRESET
0 0 0 0 5 0 0 0 0 0
Summary of Contents for MagneW3000 PLUS
