Yamatake MagneW3000 PLUS, User Manual

Page: 27 / 134

2 - 2
2.1 Before Installation
Selecting the Installation Site (1)
Introduction
In order to make full use of the device functions, please observe the following
criteria when selecting an installation site.
Notes :
• Install the product in a location with an ambient temperature of
-25
°
C - +60
°
C and an ambient humidity of 5 - 100% RH to prevent
equipment malfunction or output errors.
• Avoid installing the product near high-current power lines, motors,
or transformers to prevent damage from electromagnetic induction,
which may cause equipment malfunction or output errors.
• DO NOT use this product for grounding a welder, as it may cause
damage to the product.
• When welding near this product, be sure to ground the welding
power transformer.
• Avoid locations subject to severe vibration or highly corrosive
atmospheres to prevent detector breakage or equipment damage.
• Keep the product away from direct sunlight, wind, and rain to pre-
vent output errors.