2-24
INSP
ADJ
2
3
CAUTION:
There is a magnet attached to the end of the
dipstick. It is used to remove any metal particles
that may accumulate in the drive chain housing.
Be sure to:
•
Pull the dipstick out slowly and gently so the
metal particles do not fall off the magnet back
into the drive chain housing.
•
Wipe off the magnet before reinserting the
dipstick into the drive chain housing.
•
Remove the dipstick and check that the oil is
between the upper
a
and lower
b
levels. If not,
add oil to the upper level.
Å
For models without reverse transmissions
(VX700/SX700/MM700)
ı
For models with reverse transmissions
(VX700DX/VT700)
Recommended oil:
Gear oil API “GL-3”
SAE #75 or #80
CAUTION:
Make sure that no foreign material enters the gear
case.
•
Reinsert the dipstick and fit the loop
2
of the
dipstick handle onto the projection
3
of the gear
case.
DRIVE CHAIN
A
B
SCH2560
SCH2570
SCH2580
Summary of Contents for MM700F
