8-27
–
+
ELEC
SIGNAL SYSTEM
FUEL METER DOES NOT OPERATE.
For VX700DX/VT700:
Check the main fuse,
“IGNITION” fuse and “HEAD” fuse.
Refer to “FUSE INSPECTION” in CHAPTER 2.
OK
FAULTY
Replace the main fuse, “IGNITION” fuse and/or
“HEAD” fuse.
For VX700DX/VT700:
Check the battery.
Refer to “BATTERY INSPECTION” in CHAPTER 2.
OK
OUT OF SPECIFICATION
Replace and/or charge the battery.
Refer to “BATTERY CHARGING” in CHAPTER 2.
For VX700/SX700/MM700:
Check the condenser.
Refer to “IGNITION SYSTEM”.
OK
OUT OF SPECIFICATION
Replace the condenser.
Check the stator coil and pickup coil.
Refer to “IGNITION SYSTEM”.
OK
OUT OF SPECIFICATION
Replace the stator coil assembly.
Check the main switch.
Refer to “IGNITION SYSTEM”.
OK
FAULTY
Replace the main switch.
Check the fuel sender.
OK
FAULTY
Replace the fuel sender.
Check the load control relay.
Refer to “IGNITION SYSTEM”.
OK
FAULTY
Replace the load control relay.
Check the fuel meter.
OK
DOES NOT MOVE
Replace the fuel meter.
Correct the connection and/or
replace the rectifier/regulator
and/or CDI unit.
Summary of Contents for MM700F
