Yamaha MM700F, Service Manual

Page: 506 / 589

SPEC
9-5
MAINTENANCE SPECIFICATIONS
Crankshaft:
Crank width “A”
Crank width “B”
Maximum runout “C” : C
1
C
2
~ C
5
C
6
Measuring points: 1
2
Connecting rod big end side clearance
“D”
Connecting rod big end radial clear-
ance “E”
Connecting rod small end free play “F”
Big end bearing:
Type
Small end bearing:
Type
Crank pin:
Crank pin outside diameter
Connecting rod:
Small end diameter
Big end diameter
Read valve:
Material
Thickness
<Bending limit>
Stopper height
VX700/VX700DX/SX700/MM700/VT700
55.95 ~ 56.00 mm (2.203 ~ 2.205 in)
291.75 ~ 292.30 mm (11.486 ~ 11.508 in)
0.03 mm (0.0012 in)
0.04 mm (0.0016 in)
0.03 mm (0.0012 in)
90 mm (3.54 in)
85 mm (3.35 in)
0.25 ~ 0.75 mm (0.01 ~ 0.03 in)
0.026 ~ 0.040 mm (0.0010 ~ 0.0016 in)
0.8 ~ 1.0 mm (0.03 ~ 0.04 in)
Needle bearing
Needle bearing
26.991 ~ 27.000 mm (1.0626 ~ 1.0630 in)
24.995 ~ 25.005 mm
(0.9841 ~ 0.9844 in)
34.020 ~ 34.033 mm (1.3394 ~ 1.3399 in)
Resin
0.35 ~ 0.49 mm (0.014 ~ 0.019 in)
<1.5 mm (0.059 in)>
10.3 ~ 10.7 mm (0.41 ~ 0.42 in)
Model