Yamaha MM700F, Service Manual

Page: 368 / 589

5-29
ENG
RECOIL STARTER
INSTALLATION
1. Wind:
•
Starter rope (2-1/2 times counterclockwise)
(in the sheave drum)
2. Install:
•
Starter spring 1
•
Sheave drum assembly 2
NOTE:
•
Mesh the spring hook 3 with the case slit, then
wind the spring counterclockwise into the case
from a larger to a smaller diameter.
•
Mesh the sheave drum hook 4 with the spring
hook 5 .
3. Install:
•
Drive pawl 1
•
Cam guide 2
•
Drive plate 3
NOTE:
The cam guide 2 should not be on top of the drive
pawl 1 .
4. Pull about 102 mm (4 in) of starter rope out of the
cutout portion in the sheave drum and rotate the
sheave drum 4-1/2 times counterclockwise to
preload the starter spring.
NOTE:
Pass the rope through the case hole and make a
knot 1 in the rope so that the rope is not pulled into
the case.
SCH5640
SCH5650
SCH5660
SCH5670