19
E
5. Adjust:
• Shift cable joint position
Adjustment steps:
• Set the shift lever
1
to the neutral posi-
tion.
• Align the center of the set pin
2
with the
mark
a
on the bracket.
• Adjust the position of the cable joint
3
until its hole aligns with the set pin.
• Install the clip
4
and tighten the locknut
5
.
WARNING
The cable joint must be screwed in a
minimum of 8.0 mm (0.31 in).
6. Check:
• Shift operation
Unsmooth operation
→
Adjust.
Checking steps:
• Turn the throttle grip to the fully closed
position.
• Check the shift lever for smooth operation
by shifting the lever from neutral to forward
and reverse.
TillerHandle.book Page 19 Friday, April 12, 2013 3:19 PM
