background image

Copyright 2000 Publishing. All Rights Reserved.

This manual, software and firmware described in it are copyrighted by

their respective owners and protected under the laws of the Universal

Copyright Convention. You may not reproduce, transmit, transcribe,

store in a retrieval system, or translate into any language, in any form or

by any means, electronic, mechanical, magnetic, optical, chemical,

biological, molecular, manual, or otherwise, any part of this publication

without the express written permission of the publisher.

All products and trade names described within are mentioned for

identification purpose only. No affiliation with or endorsement of the

manufacturer is made or implied. Product names and brands appearing

in this manual are registered trademarks of their respective companies.

The information published herein has been checked for accuracy as of

publishing time. No representation or warranties regarding the fitness

of this document for any use are made or implied by the publisher. We

reserve the right to revise this document or make changes in the

specifications of the product described therein at any time without

notice and without obligation to notify any person of such revision or

change.

Print in Taiwan.

User Manual V1.1

9W_AP/P+

9W_AP/P+

Summary of Contents for 9W AP Series










































Reviews: