9W
▄
AP/P + Serial User’s Manual
3-7
menu
(described in Table 3)
sub menu of detailed
options
IDE Secondary Options are in its sub
menu
(described in Table 3)
Press <Enter> to enter the
sub menu of detailed
options
IDE Secondary Options are in its sub
menu
(described in Table 3)
Press <Enter> to enter the
sub menu of detailed
options
Drive A
Drive B
None
360K, 5.25 in
1.2M, 5.25 in
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
Select the type of floppy
disk drive installed in your
system
Video
EGA/VGA
CGA 40
CGA 80
MONO
Select the default video
device
Halt On
All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key
Select the situation in which
you want the BIOS to stop
the POST process and
notify you
Base Memory
N/A
Displays the amount of
conventional memory
detected during boot up
Extended Memory
N/A
Displays the amount of
extended memory detected
during boot up
Total Memory
N/A
Displays the total memory
available in the system
IDE Adapters
The IDE adapters control the hard disk drive. Use a separate sub menu to
configure each hard disk drive.
9W
▄
AP/P + Serial User’s Manual
3-8
IDE Primary Master sub menu
Use the legend keys to navigate through this menu and exit to the main menu.
Item
Options
Description
IDE HDD Auto-detection
Press Enter
Press Enter to auto-detect
the HDD on this channel.
If detection is successful, it
fills the remaining fields on
this menu.
IDE Primary Master
None
Auto
Manual
Selecting ‘manual’ lets you
set the remaining fields on
this screen. Selects the
type of fixed disk. "User
Type" will let you select the
number of cylinders,
heads, etc. Note:
PRECOMP=65535 means
NONE !
Capacity
Auto Display
your disk drive
size
Disk drive capacity
(Approximated). Note
that this size is usually
