9W
▄
AP/P + Serial User’s Manual
3-23
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the
CPU will be shut off.
The choice: Enabled, Disabled.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will
be powered down while all other devices remain active.
The choice: Enabled, Disabled.
Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has “hung.”
The choice: Delay 4 Sec, Instant-Off.
Wake-Up by PCI Card
This option lets you specify enable or disable PCI Card Wake-up function.
The choice: Enabled, Disabled.
Power On by Ring
This option lets you specify enable or disable Power On by Ring function.
The choice: Enabled, Disabled.
Wake Up On LAN
This option lets you specify enable or disable LAN Wake Up function.
The choice: Enabled, Disabled.
Resume by Alarm
This option lets you enable or disable the RTC Wake Up function.
The choice: Enabled, Disabled.
Date(of Month)Alarm
This item is displayed when you enable the Wake On RTC Timer option. Here you
can specify what date you want to wake up the system. For Example, setting to 15
will wake up the system on the 15th day of every month.
The choice:0-31
9W
▄
AP/P + Serial User’s Manual
3-24
Time( hh: mm: ss )Alarm
This item is displayed when you enable the Wake ON RTC Timer option. Here
you can specify what time you want to wake up the system.
The choice:hh:0-23,mm:0-59,ss:0-59.
PM Events
PM events are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awaken the system from such a mode. In
effect, the system remains alert for anything which occurs to a device which is
configured as
Enabled
, even when the system is in a power down mode.
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ[A-D] #
