141
E
2. Install:
• Wiring harness
1
NOTE:
• Pass the wiring harness through the grom-
met
2
.
• Align the taped end
a
of the wiring harness
with the end of the grommet.
• Bend the wiring harness as shown before
connecting it to the main switch coupler
3
,
making sure not to bend the section
b
of the
wiring harness too much.
c
Bend radius: more than 10.0 mm (0.4 in)
d
More than 10.0 mm (0.4 in)
1
2
1
3
a
b
c
d
TillerHandle.book Page 141 Friday, April 12, 2013 3:19 PM