127
E
2. Install:
• Hose guide
1
• Stay
2
• Bolts
3
• Protector
4
NOTE:
Clean the surface of the section
a
of the tiller
handle, and then affix the protector
4
, making
sure that no air is trapped under the protector.
T
R
.
.
Bolt:
8.0 N • m (0.82 kgf • m, 5.9 ft • lb)
3. Install:
• Tiller handle assembly
1
• Self-locking nuts
2
T
R
.
.
Self-locking nut:
37.0 N • m
(3.77 kgf • m, 27.3 ft • lb)
4. Connect:
• Wiring harness coupler
1
• Warning indicator coupler
2
NOTE:
Tighten the plastic tie
a
after connecting the
wiring harness coupler.
TillerHandle.book Page 127 Friday, April 12, 2013 3:19 PM
