manualshive.com logo in svg

Xilinx Versal ACAP CPM4, Product Manual

Share
Download
Xilinx Versal ACAP CPM4 Product Manual Download Page 280

Ports

New Ports

All of the ports in the CPM5 PCIE have 

pcie0

 or 

pcie1

 (as per the core selected ) as prefix to

the port names used in Ult™. For example, for the 

s_axis_rq_tuser

 port in

Ult is 

pcie0_s_axis_rq_tuser

 in Versal

®

 CPM5.

The following table lists the new ports in the Versal CPM5 Controllers relative to the Ult
device integrated block for PCIe IP.

Note: The following tables mentions only 

pcie0*

 ports, but apply to both 

pcie0*

 and 

pcie1*

 ports.

Table 71: New Ports for Versal CPM5

Name

I/O

Notes

pcie0_cfg_10b_tag_requester_enable[3:0]

O

Per function state of Device Control2 Register 10-Bit Tag

Requester Enable bit.

pcie0_cfg_atomic_requester_enable[3:0]

O

Per function state of Device Control2 Register AtomicOp

Requester Enable bit.

pcie0_cfg_ats_control_enable[3:0]

O

Per function State of ATS Control Register Enable bit.

pcie0_cfg_ext_tag_enable

O

State of Device Control Register Ext Tag (8-Bit) Enable

bit.

pcie0_cfg_fc_vc_sel

I

Selects the Virtual Channel for the type of flow control

information presented on the cfg_fc_* signals.

pcie0_cfg_vc1_enable

O

VC1 Resource Control Register: VC Enable bit.

pcie0_cfg_vc1_negotiation_pending

O

VC1 Resource Status Register: VC Negotiation Pending

bit.

pcie0_cfg_pasid_enable[3:0]

O

Per Function PASID Enable.

pcie0_cfg_pasid_exec_permission_enable[3:0]

O

Per Function PASID Exec Permission Enable.

pcie0_cfg_pasid_privil_mode_enable[3:0]

O

Per Function PASID Privil Mode Enable.

pcie0_cfg_fc_ph_scale[1:0]

O

Please refer to port list for details.

pcie0_cfg_fc_pd_scale[1:0]

O

Please refer to port list for details.

pcie0_cfg_fc_nph_scale[1:0]

O

Please refer to port list for details.

pcie0_cfg_fc_npd_scale[1:0]

O

Please refer to port list for details.

pcie0_cfg_fc_cpld_scale[1:0]

O

Please refer to port list for details.

pcie0_cfg_fc_cplh_scale[1:0]

O

Please refer to port list for details.

pcie0_cfg_wrreq_flr_vld

O

Please refer to port list for details.

pcie0_cfg_wrreq_msi_vld

O

Please refer to port list for details.

pcie0_cfg_wrreq_msix_vld

O

Please refer to port list for details.

pcie0_cfg_wrreq_bme_vld

O

Please refer to port list for details.

pcie0_cfg_wrreq_vfe_vld

O

Please refer to port list for details.

pcie0_cfg_wrreq_func_num[15:0]

O

Please refer to port list for details.

pcie0_cfg_wrreq_out_value[3:0]

O

Please refer to port list for details.

pcie0_cfg_perfunc_out[23:0]

O

Please refer to port list for details.

Appendix F: Migrating

PG346 (v3.3) November 16, 2022

 

www.xilinx.com

CPM Mode for PCI Express

 280

Send Feedback

Summary of Contents for Versal ACAP CPM4

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands