Xerox Wide Format 6050 User Manual Download Page 289

Page: 289 / 304

Draws a user-defined character.

Draws a user-defined fill pattern.

Creates a specified line pattern.

Inactivates the VA command.

Specifies the drawing speed.

Outputs a specified message to the panel.

Defines and fills in a sector polygon.

Specifies whether to express the pen width in
millimeters or by percentage of the P1/P2 distance.

Draws ticks on the X axis.

Draws ticks on the Y axis.

Com-

mand

Command Meaning and action

HP-GL

HP-GL/2

6030/6050

Wide Format

Summary of Contents for Wide Format 6050

















































































































































































































































































































Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands

Xerox Wide Format 6050, User Manual

Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands